Aesthetically pleasing touch switch designed to create a unique visual appeal and blend with any room decor. The beautiful tempered glass panel resists smudges & allows for easy removal of fingerprint grease making it easy to clean. The switch can be installed very easily. It requires a concealed metal box of size: 135mm x 78mm (5"x3")
-
Capacitive Touch Switch
-
Tempered Glass Panel
-
Mobile App Control (iOS & Android)
-
IR Remote Control
-
Google Home and Amazon Alexa Voice Control
-
Scheduled On / Off Ability
-
No Hub Required
-
Easy to Install and Easy to use
| Technical Specifications
- Power Source : AC 240V 50Hz
- Module : 4 (4 Switches)
- Max Load (Per Switch) : GLS & Halogen Max.200W, LED & CFL Max.40W
- Max Load (High Load Switch) : AC Upto 2000W (~2 Ton AC with EER > 3.5), Chandelier Max.400W (GLS & Halogen)
- Self Consumption : ~1.6W
- Wireless Standard : IEEE 802.11 b/g/n
- Operating Temp : -10°C to +55°C
- Dimension : 88mm x 149mm x 43mm
- Enclosure Material : ABS - FR Grade
- Remote Distance : 22 ft
| Installation Instructions
Prerequisite before installation
Step 1: Detach the front glass panel carefully from the switch module using a screwdriver.
Step 2: L - Load N - Neutral P - Phase
Follow the wiring diagram and connect the phase, neutral and load wires to the switch module terminals. If you want to separate loads between UPS and EB connect P1 to UPS and P2 to EB. If no separation is required, loop P1 & P2 and connect to EB or UPS.
While inserting the wire into the terminal make sure the copper ends are tightly twisted.
Step 3: Use the screws provided to fix the device to the console box.
Step 4: Clip the front panel to the device and turn the power ON.
Note: Due to change in capacitance, the switch may become unresponsive after fixing the glass panel. Please turn off the main power and turn it back on.
Safety Warnings:
-
Do not install the device without turning off the main power supply.
-
Do not connect the glass panel without turning off the main power supply.
-
For Loads L1 to L3, Do not connect loads greater than 6A. Each light switch is rated upto 6A resistive only.
-
For Load H, Do not connect loads greater than 16A. Each High Load switch is rated upto 16A resistive only.
-
Take extra precaution while connecting phase and neutral wires to the device and the load.
IMPORTANT NOTE:
-
Do not connect loads in series or in parallel to one 6A light switch. Only connect single light or single fan loads to each 6A switch.
-
Only a single load (6A) with a maximum of 40W is supported in cases of LED & CFL fitting. Anything more may weld the switch contacts and leave the load in a permanently ON state.
-
12V And 24V power supply based LED light strips are NOT supported in 6A light switch. 240V Mains Voltage LED Strip Lights are supported in 6A light switch.
