Dimmers

Features : Plastic casing | Frontal programming pushbutton and LED | Membrane keyboard with LEDs for status indication of outputs | Pushbutton for switching operating mode (normal / programming) | CH pushbutton for individual or simultaneous channels control | HSV / RGB pushbutton colour control mode | Connection to bus line with KNX terminal block | Connection of outputs with screw terminals | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Warranty : 1 year.

Features : Plastic housing | Free-standing device for installation in junction boxes or walls | Mounting on 35 mm profile rail (using special bracket code included) | IP10 degree of protection (device installed) | Memory function settable by DALI | Dimming up to complete switch-off (dim-to-dark) | Minimum brightness level: 0.1% | PWM modulation flicker free (2000 Hz) | DALI-settable dimming curve: linear or logarithmic | Switch-on and switch-off times settable by DALI | Optimised output curve | Warranty : 1 year.

Features : Plastic housing | Free-standing device for installation in junction boxes or walls | Mounting on 35 mm profile rail (using special bracket code included) | IP10 degree of protection (device installed) | Memory function settable by DALI | Dimming up to complete switch-off (dim-to-dark) | Minimum brightness level: 0.1% | PWM modulation flicker free (2000 Hz) | DALI-settable dimming curve: linear or logarithmic | Switch-on and switch-off times settable by DALI | Optimised output curve Warranty : 1 year.

Features : Plastic housing | Device with 4 modular units | IP20 degree of protection (device installed) | Memory function | Brightness adjustment until complete switch-off (dim-to-dark) | Minimum brightness level: 0.1% (1% in push) | PWM modulation with settable frequency (300/600/1200/2000Hz) | Settable dimming curve: linear / quadratic / exponential | Smooth switching on and off | Optimised output curve | Warranty : 1 year.

Features : Plastic housing | Device with 4 modular units | Mounting on 35 mm profile rail (according to EN 60715) | IP20 degree of protection (device installed) | Memory function, fade time, minimum and maximum level settable via DALI software | Dimming up to complete switch-off (dim-to-dark) | Minimum brightness level: 0.1% | Dimming curve: linear / logarithmic settable by DALI | Electronic short-circuit and overload protection | Warranty : 1 year.

Features : Plastic housing | Device for free installation in junction boxes or wall | Mounting on 35 mm profile rail (by means of code holder included) | IP10 degree of protection (device installed) | Dimming up to complete switch-off (dim-to-dark) | Minimum brightness level: 1% | Optimised output curve | Warranty : 1 year.

Features : Plastic housing | Device for free installation in junction boxes or wall | Mounting on 35 mm profile rail (by means of code holder included) | IP10 degree of protection (device installed) | Dimming up to complete switch-off (dim-to-dark) | Minimum brightness level: 1% | Optimised output curve Warranty : 1 year.

Features : Plastic casing | Frontal programming pushbutton and LED | Membrane keyboard with LEDs for status indication of outputs | Pushbutton for switching operating mode (normal / programming) | CH pushbutton for individual or simultaneous channels control | HSV / RGB pushbutton colour control mode | Auxiliary dry contact to disconnect load power supply during standby | Connection to bus line with KNX terminal block | Connection of outputs and 12-30 Vdc power supply with screw terminals | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Warranty : 2 years.

Features : Plastic casing | Frontal programming pushbutton and LED | Membrane keyboard with LEDs for status indication of outputs | Pushbutton for switching operating mode (normal / programming) | Connection to bus line with KNX terminal block | Connection of outputs and 230 Vac power supply with screw terminals | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 160 g | Warranty : 2 years.

Features : 4 Channels of 0-10V output and 4 channels for Relay switching | Manual output operation with push button and LED status indicator | 10 Scene functionality | Total data saving on bus failure | Possibility of connecting different phases in different outputs | Programming button and LED | DIN rail mount assembly | CE Marking* | Warranty : 18 Months.

Features : 2 Individual outputs / Channels | Manual output operation with push button and LED status indicator | 10 Scene functionality | Din rail mount assembly | Total data saving on bus failure | Possibility of Configuring Trailing-Edge and Leading-Edge per channel | Programming button | CE Mark* | Warranty : 18 Months.

Features : 2 channel phase cut dimmer for incandescent and LED lamps | Manual output operation with push button and LED status indicator | LED indication for communication and power status | DIP switch for Modbus Configuration | DIN rail mount assembly | No need of any software | High speed Modbus RTU (Slave) communication | CE Marking* | Warranty : 18 Months.