Iotics, Smart Touch Switch, 2 Gang IR Remote & Wi-Fi

Aesthetically pleasing touch switch designed to create a unique visual appeal and blend with any room decor. The beautiful tempered glass panel resists smudges & allows for easy removal of fingerprint grease making it easy to clean. The switch can be installed very easily. It requires a concealed metal box of size: 78mm x 78mm (3"x3")

• Capacitive Touch Switch

• Tempered Glass Panel

• Mobile App Control (iOS & Android)

• IR Remote Control

• Google Home and Amazon Alexa Voice Control

• Scheduled On / Off Ability

• No Hub Required

• Easy to Install and Easy to use

| Technical Specifications

• Power Source : AC 240V 50Hz 
  
  
• Module : 2 (2 Switch and Plug)
  
  
• Max Load (Per Switch) : GLS & Halogen Max.200W, LED & CFL Max.40W
  
  
• Max Load (High Load Switch) : AC Upto 2000W (~2 Ton AC with EER > 3.5), Chandelier Max.400W (GLS & Halogen)
  
  
• Self Consumption : ~1.6W
  
  
• Wireless Standard : IEEE 802.11 b/g/n
  
  
• Operating Temp : -10°C to +55°C
  
  
• Dimension : 88mm x 88mm x 43mm
  
  
• Enclosure Material : ABS - FR Grade
  
  
• Remote Distance : 22 ft

| Installation Instructions

Prerequisite before installation

• 2 module Metal Box is required

• Metal box size: 78mm x 78mm (3"x3")

• Touch switch

• Console screws

• Flat-headed screwdriver

Step 1: Detach the front glass panel carefully from the switch module using a screwdriver.

Step 2: L - Load N - Neutral P - Phase H - High Load

Follow the wiring diagram and connect the phase, neutral and load wires to the switch module terminals. Loop the two phases using a piece of wire.

While inserting the wire into the terminal make sure the copper ends are tightly twisted.

Step 3: Use the screws provided to fix the device to the console box.

Step 4: Clip the front panel to the device and turn the power ON.

Note: Due to change in capacitance, the switch may become unresponsive after fixing the glass panel. Please turn off the main power and turn it back on.

Safety Warnings:

• Do not install the device without turning off the main power supply.

• Do not connect the glass panel without turning off the main power supply.

• For Loads L, Do not connect loads greater than 6A. Each light switch is rated upto 6A resistive only.

• For Load H, Do not connect loads greater than 16A. Each High Load switch is rated upto 16A resistive only.

• Take extra precaution while connecting phase and neutral wires to the device and the load.

IMPORTANT NOTE:

• Do not connect loads in series or in parallel to one 6A light switch. Only connect single light or single fan loads to each 6A switch.

• Only a single load (6A) with a maximum of 40W is supported in cases of LED & CFL fitting. Anything more may weld the switch contacts and leave the load in a permanently ON state.

• 12V And 24V power supply based LED light strips are NOT supported in 6A light switch. 240V Mains Voltage LED Strip Lights are supported in 6A light switch.