Aesthetically pleasing touch switch designed to create a unique visual appeal and blend with any room decor. The beautiful tempered glass panel resists smudges & allows for easy removal of fingerprint grease making it easy to clean. The switch can be installed very easily. It requires a concealed metal box of size: 78mm x 78mm (3"x3")
-
Capacitive Touch Switch
-
Tempered Glass Panel
-
Mobile App Control (iOS & Android)
-
IR Remote Control
-
Google Home and Amazon Alexa Voice Control
-
Scheduled On / Off Ability
-
No Hub Required
-
Easy to Install and Easy to use
| Technical Specifications
- Power Source : AC 240V 50Hz
- Module : 2 (1 Switch - 16A)
- Max Load (Per Switch) : Geyser Upto 2500W (~20 litre Capacity), AC Upto 2000W (~2 Ton AC with EER > 35)
- Self Consumption : ~1.6W
- Wireless Standard : IEEE 802.11 b/g/n
- Operating Temp : -10°C to +55°C
- Dimension : 88mm x 88mm x 43mm
- Enclosure Material : ABS - FR Grade
- Remote Distance : 22 ft
| Installation Instructions
Prerequisite before installation
Step 1: Detach the front glass panel carefully from the switch module using a screwdriver.
Step 2: L - Load N - Neutral P - Phase
Follow the wiring diagram and connect the phase, neutral and load wires to the switch module terminals. Loop the two phases using a piece of wire.
While inserting the wire into the terminal make sure the copper ends are tightly twisted.
Step 3: Use the screws provided to fix the device to the console box.
Step 4: Clip the front panel to the device and turn the power ON.
Note: Due to change in capacitance, the switch may become unresponsive after fixing the glass panel. Please turn off the main power and turn it back on.
Safety Warnings:
-
Do not install the device without turning off the main power supply.
-
Do not connect the glass panel without turning off the main power supply.
-
Do not connect any load greater than 16A. Each light switch is rated to 16A resistive only.
-
Do not connect loads in series to one light switch.
-
This device is not suitable for single phase motor pumps as the starting current is 6 times that of the rated load current, which may cause relay contacts to permanently weld.
