Gateways, Controllers and Processors

Features : Plastic casing | Connection to bus line with KNX terminal block | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : Plastic casing | Connection to bus line with KNX terminal block | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : Connection to the bus line with KNX terminal block | Plastic casing | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : Connection to the bus line with KNX terminal block | Plastic casing | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : Plastic material | Colour LCD touch-screen display | Green (on/off connection) and orange (Tx/Rx indication LED) | Connection to bus line with KNX terminal block | RS232 (ASCII), RS485 (Modbus RTU), Ethernet (ASCII, Modbus IP), mini USB (maintenance) ports | Wall-mounting KNX-MODULE | Pre-installed in factory | Activated through assignment of L3 communication line | 128 default group addresses (expandable to 1.024) | Warranty : 1 year.

Features : Connection to the KNX bus line with standard KNX terminal block | Plastic casing | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 200 g | Warranty : 2 years.

Features : Connection to the bus line with KNX terminal block | Plastic casing | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : Connection to the bus line with KNX terminal block | Plastic casing | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : Plastic casing | Connection to bus line with KNX terminal block | Installation on 35 mm rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 145 g | Warranty : 1 year.

Features : 12-24 Vdc power supply (absorption 240 mA at 12 Vdc) by means of a special plug-in terminal supplied. Power supply not included | KNX TP bus (twisted pair) via red-black terminal provided | 1 Ethernet port via cat. 5 or higher cable and standard RJ45 connector | 2 frontal LEDs: POWER LED for signalling the presence of power supply SERVICE LED for signalling particular operations in progress | 1 RESET button housed under the front cover on the back of the vertical card | 1 RS485 port: not used | 1 USB 2.0 port: not used | Warranty : 1 year.

Features : IP-KNX gateway | ETS project import | Sending/receiving commands from KNX devices within the Control4 system | Programming of command sequences (scenes) and execution with simple connections in COMPOSER PRO using specific drivers | Execution of logics that can be configured with a graphic editor and run in the background | KNX diagnostics with notification sent to CONTROL4 in the event of malfunctions or configurable events on the KNX bus | Load management and monitoring of electricity consumption with management dependent on global current absorption, using specific Control4 drivers | Warranty : 1 years.