Search
You have no items in your shopping cart.
Metering Devices
Metering are divided into energy meters, communication modules and network analyzers. The energy meter, available with MID certificate, is used to measure energy in industrial and civilian environments as well as the main electrical parameters, and makes them available on the communication port. The communication module allows the collection and sending to a remote station of the values measured by the connected meter. The network analyser measures and stores the electrical parameters.
Features :
Network analyzer |
Plastic casing |
Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols |
Keyboard: 3 front buttons + 1 protected button |
Screw terminal blocks connection |
Installation on 35 mm DIN rail (according to EN 60715) |
4 modular units (1 MU = 18 mm) |
Protection degree IP20 (installed device) |
Weight 260 g |
Warranty : 1 years.
₹ 78,330.00 excl tax
Features :
Network analyzer |
Plastic casing |
Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols |
Keyboard: 3 front buttons + 1 protected button |
Screw terminal blocks connection |
Installation on 35 mm DIN rail (according to EN 60715) |
4 modular units (1 MU = 18 mm) |
Protection degree IP20 (installed device) |
Weight 260 g |
Warranty : 1 years.
₹ 80,445.00 excl tax
Features :
Multifunction Three-Phase Meter |
Fully bi-directional four quadrants measurements for all energies and powers |
Main electrical parameters measured and displayed for a costeffective consumption analysis |
Version for 1 or 5A CT |
8 MB for data recording |
Possibility to record MIN/AVG/MAX values for all powers |
MODBUS RTU/ASCII communication by RS485 port |
Possibility to manage the instrument in remote mode by Wintool NETME1 software |
Warranty : 1 years.
₹ 82,215.00 excl tax
Features :
Plastic casing |
Set default pushbutton to restore all parameters to the factory settings |
Frontal LED for Power (POWER) and Communication (ACT / ERR) status |
Bus line connection through KNX terminal block |
Installation on 35 mm DIN rail (according to EN 60715) |
1 modular unit (1 MU = 18 mm) |
Protection degree IP20 (installed device) |
Weight 65 g |
Warranty : 1 years.
₹ 13,125.00 excl tax
Features :
Plastic casing |
Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols |
Keyboard: 3 front buttons + 1 protected button |
Screw terminal blocks connection |
Installation on 35 mm DIN rail (according to EN 60715) |
4 modular units (1 MU = 18 mm) |
Protection degree IP20 (installed device) |
Weight 310 g |
Warranty : 1 years.
₹ 28,725.00 excl tax
Ekinex KNX Based Single-phase 80A counter direct insertion on 2-wire lines - program CT - Certif.MID
Features :
Plastic casing |
Backlighted LCD-Display with 7 main digits |
Screw terminal blocks connection |
Installation on 35 mm DIN rail (according to EN 60715) |
Protection degree IP20 (installed device) |
2 modular units (1 MU = 18 mm) |
Weight 200 g |
Warranty : 1 years.
₹ 19,410.00 excl tax
- 1
- 2
Min:
₹ 13,125.00
Max:
₹ 82,215.00
₹13125
₹82215