The range of KNX universal and multifunctional interfaces, to be interfaced with powerless contacts (such as rockers/buttons), with LED outputs at low signaling voltage and for the monitoring of electrical consumption, load’s control and thresholds of single-phase and three-phase. They also allow the monitoring and temperatures’ management with NTC probes, the placement of blinds or Venetian blinds and lighting’s control.
Features :
Plastic housing |
Wall installation in flush mounting box or, with a mounting support |
on 35 mm rail (according to EN 60715) |
Protection degree IP20 (installed device) |
Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2) |
Pollution degree 2 (according to IEC 60664-1) |
Weight 20 g |
Warranty : 1 years.
Features :
Plastic casing |
ON/OFF switching of single loads or group of loads |
Detecting the state of signaling contacts (from safety devices, alarms, etc.) |
Recalling and saving of scenes |
Sending on the bus of values (temperature, brightness, etc.) |
Switching to forced functioning (lock) |
Counting of impulses and switching cycles |
Dimming of lighting devices |
Operating of shutters and roller blinds |
Installation on 35 mm rail (according to EN 60715) |
4 modular units (1 MU = 18 mm) |
IP20 protection degree (installed device) |
Weight 145 g |
Warranty : 1 years.
Features :
Plastic casing |
Programming pushbutton and LED on the case |
Connection to bus line with KNX terminal block |
Connection to current transformers by means of a 6-wire screw terminal block |
IP20 protection degree (installed device) |
Weight 20 g |
Warranty : 1 years.
Features :
Plastic casing |
Programming pushbutton and LED on the case |
Connection to bus line with KNX terminal block |
Screw terminal blocks for connecting inputs and outputs |
IP20 protection degree (installed device) |
Weight 20 g |
Warranty : 1 years.