Features:
Housing shape fits flush into standardized drywalls |
Closed housing for easiest installation |
Triple Vector Design reduces wall vibrations |
Paintable front grille for perfect optical room adaptation |
Two specially designed 6.5″ long excursion drivers and two passive cones |
Total cone area equivalent to a 14″ driver |
Frequency range 30Hz-120 Hz (-3 dB) |
Warranty: 1 Year.
Features:
10" front-firing PolyPlas cone woofer |
250-watt RMS amplifier (500 watts peak power) |
bass-reflex design with bottom-firing tuned port |
frequency response: 35-150 Hz |
continuously variable low-pass 50-150 Hz crossover |
phase switch to acoustically match the subwoofer's output to your main speakers |
main power on/off switch plus auto standby/on mode |
line-level/LFE RCA input |
removable grille |
detachable power cord |
Warranty: 1 Year.
Features:
Woofer composed of micro ceramic composite (MCC) allows for strength and stiffness but very little weight |
Nomex/cotton blend spider for increased linearity |
2” (51mm)-diameter copper voice coil would on a Kapton bobbin for impressive power handling |
Parametric room EQ functions |
Downward-firing port allows for placement against a wall or cabinet |
Warranty: 1 Year.
Features: Active closed-box subwoofer system | 1x8" paper/Aramid Fibre cone long-throw | Freq Res - 32Hz - 140Hz (-3db) | Max power output-200W ICEpower® amplifier | Signal to noise ratio - 90dB | HxWxD - 10.2" x 10.2" x 13" | 8.85kg | Warranty: 1 Year.
Features: Active closed-box subwoofer system | 1x10" paper/Aramid Fibre cone long-throw | Freq Res - 27Hz - 140Hz (-3db) | Max power output - 200W ICEpower® amplifier | Signal to noise ratio - 90dB | HxWxD - 12.2" x 12.2" x 14.8" | 12.5kg | Warranty: 1 Year.
Features: Active closed-box subwoofer system | 1x10" paper/Aramid Fibre cone long-throw | Freq Res - 25Hz - 140Hz (-3db) | Max power output - 500W ICEpower® amplifier | Signal to noise ratio - 80dB | HxWxD - 12.8" x 12" x 14.7" | 18.7kg | Warranty: 1 Year.
Features: Long-throw 10 | Lower Freq -3 dB @ 33 Hz / -10 dB @ 28 Hz, Upper Frequency Limit -6 dB @ 150 Hz | 1x10" CCAM | Amplifier Output 220 W | Phase Control 0 Degrees & 180 Degree pure Invert | Low Pass Filter
Alignment from 50 Hz to 120 Hz | Impedance 20 k Ohms | Power Consumption Maximum 300 W, Standby
<0.5 W | Fuse Type 20 mm T4AL 250 VAC | Dimensions 12 5/8 x 12 5/8 x 14 5/16 | Weight 13.4 kg | Warranty: 1 Year