The TSW-212 SE is a 12” single driver subwoofer with built-in high-current amplifier and utilizing slotted bass port on the rear.
The whole electronics section including the amplifier is exactly the same as the one as used in our premium Platinum SW-10 v.3 subwoofer.
The amplifier deliveres 240 watts of power and is characterized by high efficency and great current drive which results in lower distorsions, more smooth and flat response and much faster amp operation with significantly reduced operation noises.
An integrated clipping limiter maintains the best performance and safe operation of the amp and woofer even at extremely high-volume levels.
The SE version utilizes higher grade components (capacitors etc.), a heavily modified woofer and redesigned internal cabinet structure (bigger internal volume and increased stiffness).
The redesigned bass driver can operate in higher amplitude ranges and can faster react on any changes in the audio signal structure.
A removable IEC type power cord gives an option to upgrade your system with a premium audiophile power cable in any time.
The TSW-212 SE subwoofer delivers the most powerful, deep bass with staggering definition, location and dynamics never met at this price level before. It is the absolute best buy in active subwoofers!
| Technology
CABINET
A subwoofer cabinet design and built-quality is one of the most critical elements influencing sound performance.
We have developed TLIE (Taga Low Interference Enclosures) cabinets to increase stiffness and limit any unwanted resonances of the enclosure.
The TLIE cabinets are built with high density and quality MDF boards and stand on solid feet which provide good isolation from the floor.
The beveled edges not only look modern and eye-catching but also play a significant role in lowering unwanted vibrations, diffraction, turbulences and standing waves effect, which can negatively affect subwoofer’s sound performance.
Acoustic damping material used inside enclosures eliminates problem of internal standing waves
Carefully selected high quality vinyl finishes are very durable, elegant, imitate natural wood texture and are very pleasant in touch. The vinyl finishes are neatly applied to cabinets using precise machinery to provide the best looks.
BASS DRIVER
1. T-yoke
2. Oversized ferrite magnet
3. Top plate
4. Terminal
5. TSAC rigid metal chassis with anti-oxidation surface process
6. Spider
7. Round wire copper voice coil
8. Polypropylene cone and rubber surround
9. Polypropylene dust cap
10. EVA gasket
THAW - Taga High Amplitude Woofer offers extended cone excursion, which results in increased speed and range. Bass is fast, strong, low and dynamic.
TSAC – Taga Super Air Cooling used in the woofer helps quicker and more effectively dispersion of internal heat to support high power and volumes.
BASSREFLEX
Low-turbulence and high-velocity rear slotted port provides exceptional dispersion of low frequencies and are located very close to the floor.
AMPLIFIER
THCA - Taga High Current Amplifier offers huge amounts of raw power, and oversized, high-performance heatsink quickly dissipates generated heat, increasing efficiency and range of amplifier.
High Current Amplifier utilizes very well designed boards layout and high quality components to provide reliability and the highest possible bass quality.
An integrated clipping limiter maintains the best performance and safe operation of the amp and woofer even at extremely high volume levels.
High quality toroidal power transformer provides stable energy which is available at all power levels.
| Specifications
| Design |
Active subwoofer, 1 driver
TLIE enclosure |
| Power handling |
240W RMS
750W Dynamic Peak
Class A/B, THCA |
| Frequency response |
23Hz - 200Hz |
| Bassreflex |
Rear, single, slotted |
| Crossover filter frequency |
30Hz - 200Hz (variable) |
| Phase regulation |
0 - 180° (variable) |
| Inputs |
1 x Low Input (L/R)
1 x SUB (LFE) |
| Bass driver |
305 mm (12”), polypropylene
THAW, TSAC
4ohm |
| Features / accessories |
Auto On / Off
Y type RCA-RCA Subwoofer Cable
Removable IEC power cord |
| AC power / power consumption |
220V-240V (power selector to 110V-120V) 50/60Hz, 250W
<0.5W (Standby Mode) |
| Dimensions (H x W x D) |
40.2 x 37 x 44.8 cm (incl. grill & feet) |
| Weight |
21 kg / pc. |
| Finish |
Black, Modern Wenge, Walnut, Oak, White |
