Visonic Wireless Panic Emergency Button Transmitter MCT-201

| Description

Visonic Wireless Panic Emergency Button Transmitter MCT-201

• The MCT-201 is a miniature Visonic Wireless Panic Emergency button UHF transmitter, designed for use in advanced, high-security alarm and remote control systems.
• Transmission is activated by depressing the recessed push button at the center of the unit.
• When activated, it sends either an audible or silent panic alarm to the alarm panel.
• The panel then sends an SMS to 4 pre-defined numbers and also calls 4 pre-defined numbers.
• Operating power is obtained from an internal 12-volt alkaline battery.
• An LED lights during transmission, indicating the battery voltage condition.
• If the LED does not light during transmission, the battery must be replaced immediately.
• In addition, a transmitter with such a low battery will automatically send a low battery code with each transmission.

| Features

• Response Alarms also provides the software (Central Monitoring System) which can be installed in a control room where the alarm is sounded.
  
• Email, email reports and SMSs can also be sent automatically to the concerned person from the central monitoring system.
• Very easy to install and maintain as it does not require any extra hardware.
• Centeral monitoring system also supports both IP over local network or Internet and GSM module which works over the normal SIM card.

Compatible with PowerMax™ and all Visonic PowerCode™ wireless panels and receivers.

Available only in 433.9 MHz.

This is not a standalone burglar Alarm. It requires one of the following panels to work together:
Visonic Wireless Burglar Alarm Kit PME (433) KIT
Visonic Wireless Burglar Alarm Kit With GSM PME (433) KIT

For IOS

For Android