Visonic Wireless Burglar Alarm Kit PME (433) KIT

| Description

Visonic Wireless Burglar Alarm Kit PME (433) KIT

• 28 Wireless Zones: which allows you to connect 28 Wireless detectors.
• Access from remote telephones: You may access the Alarm System from a remote telephone by dialing to your own landline number and Arm/Disarm it or receive system status information.
• Looking after elderly, physically handicapped and infirm individuals: The system can be programmed to monitor activity within the protected area .
• Disarming under duress: If a user is forcibly compelled to disarm the system (for example at gun point), he can use a special code that disarms the system apparently as usual, but a silent call to pre-defined telephone numbers.
• System supervision: All wireless peripherals within the protected site send periodic supervision messages. If such a message is overdue, the Alarm System displays an ‘inactivity’ trouble message. Your installer can disable this feature if so desired.
• Battery supervision: You do not have to worry about ‘dead’ batteries. The Alarm System displays a ‘Low Battery’ message whenever a battery in a wireless sensor is found to be near the end of its useful life. When the battery voltage in the wireless siren is low, a low battery message is sent to the alarm system. After the low voltage message delivery, at least 2 siren alarms are possible before the siren is totally inactive. Battery life of minimum 1 year for each sensor under optimal conditions.
• Built-in PSTN (Telephone Line) communicator: can be connected to existing fixed landline which can work as a backup to the GSM Latch key function which calls the owner when the panel is disarmed by an authorized user. Informs the owner when the shop/office is opened or parents when their children comes home.
• Completely wireless: with only cable required for power to the main control unit and telephone line.
  Very easy installation for existing home and offices as it does not require any provision for wiring.
  In-built 90 db siren in the panel itself.
  Provision to connect completely wireless outdoor siren with flashing lights which becomes a first visual deterrent for the burglars. Under ideal conditions the battery life of the outdoor siren is 3 years.
  Easy operation for arm and disarm. Can be used by elderly or children or servant.
• Multiple arming modes:
  AWAY: When nobody is in the premises
  HOME: When you are inside the premises. You can assign which sensors will be armed and which are disarmed in this case.
  AWAY-INSTANT: Arm the system without an entry delay when nobody is inside the premises.
  HOME-INSTANT: Arm the system without an entry delay when the premises is occupied.
  LATCHKEY: Get a notification when your children or staff disarms the system in your absence.
  BYPASS: Leave certain individual sensors disarmed and partially arm the system.
  Range of optional completely wireless indoor and outdoor sensors and emergency buttons like Pet Immune Wireless Motion Detector, Magnetic Contact , Outdoor detector, Flood Detector, Advanced Acoustic Glass Break Wireless Detector and Wireless Smoke Detector
• Partition-ready: controls up to 4 partitions
  Easy-view LCD display and icon-based keypad
• Back-up battery: supplies multiple peripherals and also backs up internal GSM/GPRS/IP modules
  Fully compliance with most international standards and regulations, including: FCC, CE and EN50131 grade 2
  Voice Communication Facility is not available.

Kit Content
1 – PowerMax Express Panel Visonic Wireless Burglar Alarm Kit PME (433) KIT
1 – Wireless Keyfob (MCT-234)
1 – Wireless Door Contact (MCT-302)
1 – Pet Immune Wireless Motion Detector(Next+ K9-85 MCW)

Compatible with PowerMax™ and all Visonic PowerCode™ wireless panels and receivers.

Available only in 433.9 MHz.

For IOS

For Android