Chat with Us
You have no items in your shopping cart.

Ekinex Kit with network analyzer and Rogowski coils 30cm- Volt.85/265Vac - RS485 - KNX module

Features : Network analyzer | Plastic casing | Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols | Keyboard: 3 front buttons + 1 protected button | Screw terminal blocks connection | Installation on 35 mm DIN rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | Protection degree IP20 (installed device) | Weight 260 g | Warranty : 1 years.
₹ 78,330.00 excl tax
Manufacturer: Ekinex
SKU: EK-NA-R-C-30cm
Delivery date 1 week
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
+ -

| Description

 

The kit Ekinex® EK-MEK includes a EK-ME1-MDE network analyzer (enhanced version) and three sensors for measurement and recording of Rogowski current. Sensors are available with the following lengths: 300, 450 and 700 mm.

 

| Features

 

  • Fully bidirectional four quadrants measurements for all energies and powers
  • Main electrical parameters measured and displayed for a cost effective consumption analysis
  • Version for 1 or 5A CT
  • 8 MB for data recording
  • Possibility to record MIN / AVG / MAX for instantaneous parameters
  • Possibility to record all energy counters
  • Modbus RTU / ASCII communication by RS485 port
  • Possibility to manage the instrument in remote mode by WintoolNETME1 software
  • Network analyzer
  • Plastic casing
  • Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols
  • Keyboard: 3 front buttons + 1 protected button
  • Screw terminal blocks connection
  • Installation on 35 mm DIN rail (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • Protection degree IP20 (installed device)
  • Weight 260 g

 

| Specifications

 

Rogowski coils

 

Transducer
  • Coil length: 30, 45 or 70 cm
  • Wire diameter: 8,3 ± 0,2 mm
  • Closing: bayonet
  • Weight: from 150 to 500 g
  • Material: thermoplastic UL94-V0

 

Electrical features
  • Output level (RMS): 100 mV / 1 kA @50Hz (standard)
  • Transducer resistance: from 70 to 900 Ω
  • Position error: less than ±1% of reading (with wire diameter = 15 mm)
  • Frequency: around 40 Hz at 20 kHz
  • Operating voltage: 1000 VRMS CAT III, 600 VRMS CAT IV
  • Pollution degree 2
  • Test voltage: 7400 VRMS / 1 min

 

Connection wires
  • Type: 2 x 0,15 mm shielded
  • Length: 300 cm

 

Delivery

Delivery includes a network analyzer and 3 Rogowski coils.

Write your own review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*

| Description

 

The kit Ekinex® EK-MEK includes a EK-ME1-MDE network analyzer (enhanced version) and three sensors for measurement and recording of Rogowski current. Sensors are available with the following lengths: 300, 450 and 700 mm.

 

| Features

 

  • Fully bidirectional four quadrants measurements for all energies and powers
  • Main electrical parameters measured and displayed for a cost effective consumption analysis
  • Version for 1 or 5A CT
  • 8 MB for data recording
  • Possibility to record MIN / AVG / MAX for instantaneous parameters
  • Possibility to record all energy counters
  • Modbus RTU / ASCII communication by RS485 port
  • Possibility to manage the instrument in remote mode by WintoolNETME1 software
  • Network analyzer
  • Plastic casing
  • Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols
  • Keyboard: 3 front buttons + 1 protected button
  • Screw terminal blocks connection
  • Installation on 35 mm DIN rail (according to EN 60715)
  • 4 modular units (1 MU = 18 mm)
  • Protection degree IP20 (installed device)
  • Weight 260 g

 

| Specifications

 

Rogowski coils

 

Transducer
  • Coil length: 30, 45 or 70 cm
  • Wire diameter: 8,3 ± 0,2 mm
  • Closing: bayonet
  • Weight: from 150 to 500 g
  • Material: thermoplastic UL94-V0

 

Electrical features
  • Output level (RMS): 100 mV / 1 kA @50Hz (standard)
  • Transducer resistance: from 70 to 900 Ω
  • Position error: less than ±1% of reading (with wire diameter = 15 mm)
  • Frequency: around 40 Hz at 20 kHz
  • Operating voltage: 1000 VRMS CAT III, 600 VRMS CAT IV
  • Pollution degree 2
  • Test voltage: 7400 VRMS / 1 min

 

Connection wires
  • Type: 2 x 0,15 mm shielded
  • Length: 300 cm

 

Delivery

Delivery includes a network analyzer and 3 Rogowski coils.

Customers who bought this item also bought
Features : Network analyzer | Plastic casing | Backlighted LCD-Display , 43 x 29 mm 3 rows, 4 digits + symbols | Keyboard: 3 front buttons + 1 protected button | Screw terminal blocks connection | Installation on 35 mm DIN rail (according to EN 60715) | 4 modular units (1 MU = 18 mm) | Protection degree IP20 (installed device) | Weight 260 g | Warranty : 1 years.
₹ 78,330.00 excl tax