Sorry - this product is no longer available

Ekinex Kit with network analyzer and Rogowski coils 70cm- Volt.85/265Vac - RS485 - KNX module

Features : Multifunction Three-Phase Meter | Fully bi-directional four quadrants measurements for all energies and powers | Main electrical parameters measured and displayed for a costeffective consumption analysis | Version for 1 or 5A CT | 8 MB for data recording | Possibility to record MIN/AVG/MAX values for all powers | MODBUS RTU/ASCII communication by RS485 port | Possibility to manage the instrument in remote mode by Wintool NETME1 software | Warranty : 1 years.

Manufacturer: Ekinex

SKU: EK-NA-R-C-70cm

Shipping

Delivery date 1 week

Download Technical Datasheet

Qty:

+ -

Overview
Reviews
Contact Us

| Description

The kit Ekinex® EK-MEK includes a EK-ME1-MDE network analyzer (enhanced version) and three sensors for measurement and recording of Rogowski current. Sensors are available with the following lengths: 300, 450 and 700 mm.

| Features

Multifunction Three-Phase Meter
Fully bi-directional four quadrants measurements for all energies and powers
Main electrical parameters measured and displayed for a costeffective consumption analysis
Version for 1 or 5A CT
8 MB for data recording
Possibility to record MIN/AVG/MAX values for all powers
MODBUS RTU/ASCII communication by RS485 port
Possibility to manage the instrument in remote mode by Wintool NETME1 software
Suitable to measure currents from mA to hundreds of kA
High linearity
Wide dynamic range
Use with large size or awkward shaped conductors or in places with limited access
No danger from open-circuited secondary
Not damaged by large overloads
Non-intrusive (no power drawn from the main)
Light weight (it can be charged on the measured conductor
Totally shielded

| Specifications

Rogowski coils

Transducer

Coil length: 30, 45 or 70 cm
Wire diameter: 8,3 ± 0,2 mm
Closing: bayonet
Weight: from 150 to 500 g
Material: thermoplastic UL94-V0

Electrical features

Output level (RMS): 100 mV / 1 kA @50Hz (standard)
Transducer resistance: from 70 to 900 Ω
Position error: less than ±1% of reading (with wire diameter = 15 mm)
Frequency: around 40 Hz at 20 kHz
Operating voltage: 1000 VRMS CAT III, 600 VRMS CAT IV
Pollution degree 2
Test voltage: 7400 VRMS / 1 min

Connection wires

Type: 2 x 0,15 mm shielded
Length: 300 cm

Delivery

Delivery includes a network analyzer and 3 Rogowski coils.

Write your own review

Only registered users can write reviews

Review title: *

Review text: *

Rating:

Bad
Rating 1 Rating 2 Rating 3 Rating 4 Rating 5
Excellent

Your name *

Your email *

Enquiry *