Intrusion and Burglar Alarm

Features: With in-built 85db siren and flashing light | Absolutely no false alarms | Battery life of up to 5 years | Low battery and temper alarm transmission to the control panel.

Features: Battery operated | Absolutely no false alarms | Battery life of more than 1 year | Low battery and panic alarm transmission to the control panel.

Features: Hybrid panel that can be installed out of sight, operated by the KP-250 PG2 wireless two-way keypad | Optional 3G, GSM/GPRS and IP modules | Optional ioXpander-8 internal expander module that supports 8 configurable wired input/output ports, wired siren and wired voice box | Supports up to 4 ioXpander-12×4 external expander modules, for a total of 56 wired zones | Up to 48-hour backup battery | Extensive range of PowerG peripherals for every application.

Features: Unmatched affordability and performance | Optional 3G, GSM/GPRS and IP modules | Extensive range of PowerG peripherals for every application | Remote configuration and diagnostics with system status indications | All devices are configured from the panel.

Features: Great solution to protect doors, windows or large openings from intruders | Creates a curtain at the same time allows you to use the room without triggering an alarm | Battery life of more than 1 year | Low battery and temper alarm transmission to the control panel.

Features: Detects motion for up to 15 mtrs and 90 degree angle | Complete protection from any movement in a room which is 15 mtr by 15 mtr | Battery operated with average battery life of over 1 year.

Features: Supports user and installer menus | Enables a complete view and control of the system | Designed to work with all PowerMaster panels, including new PowerMaster-33 G2 for residential and SME markets | Easy use by keypad, proximity tags or RFID cards.

Features: One-click arming/ disarming, panic alarm and checking of system status | Large transmission range enables repeater-free installations | Visible low battery indication | Compatible with PowerMaster systems and PowerG receivers | Long battery life (8 years with typical use).

Features: with in-built LED | Battery life of more than 5 years | Low battery and temper alarm transmission to the control panel.

Features: The MC-303 PG2 provides additional protection of property, with timely alerts, instantly when an intrusion attempt begins.

Features: This detector is wall/ceiling mountable and suitable for most types of window/door glass: plate, tempered, laminated, wired, coated and sealed insulating glass | No adjustment is necessary during installation – the detector is fully pre-calibrated | The detector provides temperature and light level reports for PowerG panels that support this feature | The acoustic sensor of the GB-502 PG2 is omnidirectional, providing full coverage | Coverage is measured from the sensor to the point on the glass farthest from the sensor | The sensor can be mounted as close as 1.5 m (5 ft) from the glass.

Features: SD-304C PG2 is a fully supervised two-way magnetic contact transmitter, designed primarily for protecting doors and windows.| This highly reliable wireless device is compatible with PowerMaster® alarm systems and is very easy to install and operate in a wide range of residential and commercial environments.

Features: Visonic wireless MCX-610 extends the communication range between the PowerMax® systems and other PowerCode™ transmitter, including one-way and two-way keyfobs, remote commander and PowerCode motion detectors | It receives alarm, status and control messages from the wireless devices and sends these messages to the control panel.

Features: The internal WCDMA-3G module enables the PowerMaster control panel to operate over a GSM/GPRS/UMTS cellular network. The WCDMA-3G model is optional and can be installed in any of the following control panels: PowerMaster-10 G2 | PowerMaster-30 G2 | PowerMaster-33 G2 | PowerMaster-360R.

Features: Camera range in parallel to PIR coverage, no “lost” areas when the camera takes pictures | Innovative Octa-Quad technology can distinguish between a moving person, swaying trees and bushes, minimizing false alarms while ensuring the detection of real threats | Configured from the panel – No hardware switches and no need to re-open the detector once closed | Unprecedented, complete anti-masking protection | Market-leading black mirror optics – Provide exceptionally high immunity to false alarms from sunlight and car headlights.