Model |
DHI-VTO2111D-P-S2 |
System |
Main Processor |
Embedded processor |
Operating System |
Embedded LINUX operating system |
Button Type |
Mechanical |
Interoperability |
ONVIF |
Internet Protocol |
SIP; P2P; IPv4; DNS; RTSP; RTP; TCP; UDP |
Basic |
Camera |
1/4" 1MP CMOS high definition, low illumination/WDR, color/IR |
Angle of View |
Horizontal: 107°; vertical: 61°; diagonal: 122° |
WDR |
120 dB |
Noise Reduction |
3D noise reduction |
Video Compression |
H.264 |
Video Resolution |
Main stream: WVGA, 720P, D1 Sub stream: CIF, WVGA, QVGA, 1080P, D1 |
Frame Rate |
PAL: 25 fps NTSC: 30 fps |
Video Bit Rate |
256 K to 4 M |
Light Compensation |
Auto IR |
D/N |
ICR auto switch |
Audio Compression |
G.711a; G.711u; PCM |
Audio Input |
1 |
Audio Output |
Built-in speaker |
Audio Mode |
Two-way voice call |
Audio Enhancement |
Echo suppression and cancellation/digital noise reduction |
Audio Bit Rate |
16 kHz, 16 Bit |
Function |
Communication |
Full digital |
Unlock Mode |
Card/App remote/indoor monitor unlock |
Card Type |
IC card |
Motion Detection |
Video motion detection |
Auto Snapshot |
Auto snapshot can only be enabled on indoor monitors |
Leave Photos and Messages |
Yes (Insert an SD card into the indoor monitor.) |
Web Configuration |
Yes |
Performance |
Card Reading Distance |
3cm–5cm |
Casing |
PC+Acrylic |
Capacity |
Card |
10,000 |
Port |
RS-485 |
1 |
Electric Lock |
1 |
Exit Button |
1 |
Door Status Detection |
1 |
Lock Control |
1, normally closed by default |
Network |
1 10Mbps/100Mbps network port (8-core white ribbon cable) |
Alarm |
Tamper |
Yes |
General |
Color |
Black |
Power Supply Mode |
12 VDC, 1 A Standard PoE |
Installation |
Surface mount |
Certifications |
CE FCC UL |
Accessory |
Brackets and alarm ribbon cable |
Dimensions |
135 mm × 70.4 mm × 34.4 mm (5.31" × 2.77" × 1.35") |
Protection Grade |
IP65 (silicone sealant is needed, see the quick start guide) |
Operating Temperature |
–30°C to +60°C (–20°F to +60°F ) |
Operating Humidity |
10%–90% (RH) (Non-condensing) |
Operating Altitude |
Beneath 3000 m (9842.52 ft) |
Power Consumption |
Standby≤1 W, working≤5 W |
Gross Weight |
326 g (0.72 lb) |
Model |
DHI-VTH2421FB-P |
Main Processor |
High performace embedded processor |
Operating System |
Embedded LINUX OS |
Screen Type |
Capacitive screen |
Display |
7-inch TFT screen |
Resolution |
1024 × 600 |
Video Compression |
H.264 |
Audio Compression |
G.711A, G.711U, PCM |
Audio Input |
1 channel all-direction microphone |
Audio Output |
Built-in 1.5W loudspeaker |
Audio Mode |
Support dual-way bidirectional talk |
Audio Enhancement |
Support echo cancellation/DNR |
Audio Bit Rate |
16 kbps |
Communication Mode |
Full digital |
Information Release |
Support to receive and view notifications issued by center |
Leave Videos or Text Messages |
Yes |
DND Mode |
Support to set DND period |
Sub-station Quantity |
9 |
Alarm Input |
6 channel (switch quantity) |
Alarm Output |
1 channel |
Network |
1 RJ-45 |
SOS Alarm |
Yes |
Casing |
PC + ABS |
Appearance Color |
Black |
Power Supply |
12 VDC, 1 A Standard PoE |
Installation |
Wall mount |
Accessories |
Default bracket Default alarm cable |
Dimensions |
119.6 mm × 221.5 mm × 21.5 mm (4.71" × 8.72" × 0.85") |
Operating Temperature |
-10°C to +55°C (+14°F to +131°F) |
Operating Humidity |
10%–95% (RH) |
Power Consumption |
Standby≤4 W, work≤6 W |
Gross Weight |
0.35 kg (0.77 lb) |
Power Supply Mode |
PoE or 12 VDC |
Storage |
Support Micro SD, maximum memory capacity 32 G, standard memory capacity 8 G |
Model |
DH-PFS3006-4ET-36 |
Main Processor |
High performace embedded processor |
Ethernet Port |
4 PoE ports with 10/100 Mbps Base-TX 2 uplink ports with 10/100Mbps Base-TX |
PoE Power Consumption |
Port1-4 ≤30 W, whole PoE budget ≤36 W |
PoE Protocol |
IEEE802.3af, IEEE802.3at |
Weight |
0.56 kg (1.23 lb) |
Dimension(W×D×H) |
194.0 mm × 108.1 mm × 35.0 mm (7.64" × 4.26" × 1.38") |