Iotics, Smart Touch Switch, 1 Gang DoorBell

Aesthetically pleasing touch switch designed to create a unique visual appeal and blend with any room decor. The beautiful tempered glass panel resists smudges & allows for easy removal of fingerprint grease making it easy to clean. The switch can be installed very easily. It requires a concealed metal box of size: 78mm x 78mm (3"x3")

• Stylish and Affordable
  
  
• Capacitive Touch Technology
  
  
• Tempered Glass Panel
  
  
• Safe to Use
  
  
• Retrofit
  
  
• Easy to Install 

| Technical Specifications

• Power Source: AC 240V 50Hz
  
  
• Module: 2 
  
  
• Load Type: AC Doorbell, DC Doorbell with Built-in Battery
  
  
• Self Consumption: ~1.6W
  
  
• Operating Temp : -10°C to +55°C
  
  
• Dimension : 88mm x 88mm x 43mm
  
  
• Enclosure Material: ABS - FR Grade

| Installation Instructions

Prerequisite before installation

• Metal box of size: 78mm x 78mm (3"x3") (2 Module)

• Touch switch

• Console screws

• Flat-headed screwdriver

Step 1: Detach the front glass panel carefully from the switch module using a screwdriver.

Step 2a: AC Doorbell

N - Neutral P - Phase IN - Phase Input OUT - Phase Output

Follow the wiring diagram and connect the Phase, Neutral wires to the switch module terminals. Loop P and IN using a piece of wire, Connect OUT wire to Doorbell input.

While inserting the wire into the terminal make sure the copper ends are tightly twisted.

Step 2b: DC Doorbell (With Built-In Battery)

N - Neutral P - Phase IN - Doorbell Input OUT - Doorbell Output

Follow the wiring diagram and connect the Phase, Neutral wires to the switch module terminals. Connect IN & OUT wires to the corresponding Doorbell wires.

While inserting the wire into the terminal make sure the copper ends are tightly twisted.

Step 3: Use the screws provided to fix the device to the console box.

Step 4: Clip the front panel to the device and turn the power ON.

Note: Due to a change in capacitance, the switch may become unresponsive after fixing the glass panel. Please turn off the main power and turn it back on.

Safety Warnings:

• Wireless Bells are not supported

• 12V DC Doorbell might require additional wiring

• The device is NOT waterproof.

• Do not install the device without turning off the main power supply.

• Do not connect the glass panel without turning off the main power supply.

• Do not connect any load greater than rated.

• Take extra precautions while connecting phase and neutral wires to the device and the load.