Aesthetically pleasing touch switch designed to create a unique visual appeal and blend with any room decor. The beautiful tempered glass panel resists smudges & allows for easy removal of fingerprint grease making it easy to clean. The switch can be installed very easily. It requires a concealed metal box of size: 233mm x 78mm (9"x3")
-
Capacitive Touch Switch
-
Tempered Glass Panel
-
Mobile App Control (iOS & Android)
-
IR Remote Control
-
Google Home and Amazon Alexa Voice Control
-
Scheduled On / Off Ability
-
No Hub Required
-
Easy to Install and Easy to use
| Technical Specifications
- Power Source : AC 240V 50Hz
- Module : 8 (8 Switches)
- Max Load (Per Switch) : GLS & Halogen Max.200W, LED & CFL Max. 40W
- Max Load (High Load Switch) : AC Upto 2000W (~2 Ton AC with EER > 3.5), Chandelier Max.400W (GLS & Halogen)
- Self Consumption : ~1.6W
- Wireless Standard : IEEE 802.11 b/g/n
- Operating Temp : -10°C to +55°C
- Dimension : 88mm x 247mm x 43mm
- Enclosure Material : ABS - FR Grade
- Remote Distance : 22 ft
| Installation Instructions
Prerequisite before installation
Step 1: Detach the front glass panel carefully from the switch module using a screwdriver.
Step 2: L - Load F - Fan N - Neutral P1 - EB/UPS P2 - EB
P1 Powers - L1, L2, L3, L4 P2 Powers - L5, L6, H1 & H2(High Load)
Follow the wiring diagram and connect the phase, neutral and load wires to the switch module terminals.
Note: If you want to separate loads between UPS and EB connect P1 to UPS and P2 to EB. If no separation is required, loop P1 & P2 and connect to EB or UPS. Connect High loads to H1 & H2.
Step 3: Use the screws provided to fix the device to the console box.
Note: While inserting the wire into the terminal make sure the copper ends are tightly twisted.
Step 4: Clip the front panel to the device and turn the power ON.
Note: Due to change in capacitance, the switch may become unresponsive after fixing the glass panel. Please turn off the main power and turn it back on.
Safety Warnings:
-
Do not install the device without turning off the main power supply.
-
Do not connect the glass panel without turning off the main power supply.
-
For Loads L1 to L6, Do not connect loads greater than 6A. Each light switch is rated upto 6A resistive only.
-
For Load H1 & H2, Do not connect loads greater than 16A. Each High Load switch is rated upto 16A resistive only.
-
Take extra precaution while connecting phase and neutral wires to the device and the load.
IMPORTANT NOTE:
-
Do not connect loads in series or in parallel to one 6A light switch. Only connect single light or single fan loads to each 6A switch.
-
Only a single load (6A) with a maximum of 40W is supported in cases of LED & CFL fitting. Anything more may weld the switch contacts and leave the load in a permanently ON state.
-
12V And 24V power supply based LED light strips are NOT supported in 6A light switch. 240V Mains Voltage LED Strip Lights are supported in 6A light switch.
