| Description
The W15 is the largest subwoofer within the Anthra subwoofer series. It features a 15” (38 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver powered by a Class-D 1,500 Watt amplifier, housed within a comprehensively internally braced, sealed-box cabinet.
Engineered to deliver the deepest bass in the largest of spaces, the Anthra W15 subwoofer features a massively powerful 1,500 Watt Class-D amplifier driving a 15” (38cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W15 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.
A full-colour LCD and rotatory dial are located on the back panel, to allow for basic subwoofer setup and EQ preset selection. In contrast, advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.
Key Features
- 1 x 15” (38 cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 1,500 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
- RCA inputs (left/right. The left Input is LFE)
- RCA outputs allows daisy chain of up to 4 Anthra subwoofers
- XLR inputs for professional installation connectivity option
- XLR outputs allows daisy chain of up to four Anthra subwoofers
- Available in Gloss Black and Satin White finishes
- MaestroUnite Setup for Monitor Audio Anthra Subwoofers allows a user complete bespoke setup. Available to download from the App Store and Google Play.
| Specification
System Format
|
|
Drive Unit Complement
|
1x 15" (381 mm) High Linear-Excursion Triple Suspension Driver
|
| Amplifier Classification |
|
Lower Frequency Limit
|
|
Upper Frequency Limit
|
|
Driver Excursion (pk-pk)
|
|
| DSP |
28 Bit 50 MIPS Configurable through MaestroUnite
|
Analogue Digital Conversion
|
Autoranging Input which combines a 10Vrms maximum input with low signal-to-noise for small signals
|
Amplifier Output Power, 240Vac
|
Instantaneous: 2500 W*
Continuous short-term: 1400 W** |
Amplifier Output Power, 120Vac
|
Instantaneous: 2500 W
Continuous short-term: 1400 W |
LED UI Control
|
|
Phase Control
|
0-360 Degrees measured at LPF Crossover
|
Low Pass Filter
|
20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct
|
Custom EQ
|
Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass)
|
Volume Level
|
Wide adjustable input gain to allow maximum output from a wide range of input signals
|
Inputs
|
Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)Mono/LFE Balanced XLR
|
Outputs
|
Stereo unbalanced outputs with unbuffered throughput from RCA Inputs
Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input
|
Mains Input Voltage
|
Universal Mains, 85-265VAC
|
External Dimensions (without feet) (HxWxD)
|
|
Power Consumption
|
|
Cabinet Construction
|
Braced 25 mm thick MDF with 36 mm front baffle
|
Grille
|
Cloth-covered magnetically attached Grilles
|
Weight
|
|
