Ekinex KNX Based Binary output 16-fold / blind actuator 8-fold

Features : Plastic casing | Frontal programming pushbutton and LED | Membrane keyboard with LED’s for status indication | Pushbutton for switching operating mode (normal / programming) | Connection to bus line with KNX terminal block | Connection of outputs and 230 Vac power supply with screw terminals | Overvoltage class III (according to EN 60664-1) | Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2) | Pollution degree 2 (according to IEC 60664-1) | Installation on 35 mm rail (according to EN 60715) | 8 modular units (1 MU = 18 mm) | IP20 protection degree (installed device) | Weight 595 g | Warranty : 1 years.

₹ 37,185.00 excl tax

Manufacturer: Ekinex

SKU: EK-BO-16F-BA-8F

Shipping

Delivery date 1 week

Download Technical Datasheet

Qty:

+ -

Overview
Reviews
Contact Us

| Description

The Ekinex® EK-FF1-TP binary output / blind actuator allows to command 16 groups of loads or control 8 drives for motorised blinds independently. The device is fitted with membrane pushbuttons for manual command (even in the absence of bus power) and LED’s for status indication; a pushbutton allows to switch between automatic and manual operation modes. The device integrates a KNX bus communication module and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and requires an additional 230 Vac power supply to operate.

| Features

Plastic casing
Frontal programming pushbutton and LED
Membrane keyboard with LED’s for status indication
Pushbutton for switching operating mode (normal / programming)
Connection to bus line with KNX terminal block
Connection of outputs and 230 Vac power supply with screw terminals
Overvoltage class III (according to EN 60664-1)
Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
Pollution degree 2 (according to IEC 60664-1)
Installation on 35 mm rail (according to EN 60715)
8 modular units (1 MU = 18 mm)
IP20 protection degree (installed device)
Weight 595 g

| Specifications

Power supply

Voltage auxiliary 100-230 Vac 50/60 Hz
Voltage control section 30 Vdc by KNX bus
Current consumption from bus < 10 mA
Power on bus < 240 mW

Outputs

Number: 16 or 8 independent channels (depending on device use)
Nominal voltage (Un): 100-230 Vac 50/60Hz
Nominal current (In): max 16 (10) A (both @100Vac and @230Vac)
Max. switched power: max 4000 VA @250Vac

Delivery

Delivery includes a terminal block for connection to the bus.

Write your own review

Only registered users can write reviews

Review title: *

Review text: *

Rating:

Bad
Rating 1 Rating 2 Rating 3 Rating 4 Rating 5
Excellent

Your name *

Your email *

Enquiry *