| Description
The exceptional Cinergy Sub15 can be installed in the wall, stacked or used as a floorstanding unit.
Better yet, you can combine it with other Cinergy Sub15 and Cinergy 300 units to create a hidden ‘sound wall’, delivering the kind of audio rarely experienced in the home. In order to achieve the full THX-certified experience, Cinergy Sub15 needs be to paired with Monitor Audio’s IA750-2 / IA750-4 installation amplifier. As such, the Cinergy Sub15 is only sold along with the IA750-2 / IA750-4, ensuring you enjoy great sound without compromise.
| Key Features
- Can be mounted in-wall, stacked or used as a floorstander
- Sized to match the Cinergy 300 speakers, making the products easy to combine
- Isolation feet to eliminate unwanted vibrations
- Bracing/securing brackets for use in hidden sound wall
| Specification
| THX Certification |
THX® Certified Ultra (with 2 x Cinergy Sub15’s) |
| System Format |
N/A |
| Sensitivity (2.83 Vrms @ 1 M |
86 dB @ 100 Hz |
| Maximum Linear SPL**** (@1m, free space) |
Continuous 109 dB, Peak 120 dB |
| Power Handling (RMS) |
Continuous 600 W, Peak* 1500 W (Band limited***) |
| Nominal Impedance |
4 Ohms |
| Minimum Impedance (20 Hz - 20 kHz) |
4 Ohms |
| Recommended Low-Frequency Crossover Frequency |
40 - 100 Hz (Low Pass) |
| Recommended Amp Requirements (RMS) |
Must be used with IA750-2 / IA750-4 running C Sub Profile |
| Bass Alignment |
Sealed |
| Port Tuning Frequency |
N/A |
| LF Extension, In Wall, With Port Bungs (- 6dB) |
N/A |
| LF Extension, In Free Space, No Port Bungs (- 6dB) |
17 Hz (IA750-2 / IA750-4) |
| HF Extension (-6dB) |
N/A |
| Drive Unit Complement |
1x 15" Ultra high Excursion C-CAM Driver |
| External Dimensions (Cabinet Only (H x W x D)) |
540 x 540 x 280 mm (211/4 x 211/4 x 11") |
| External Dimensions (Inc Grille) (H x W x D) |
N/A |
| Max External Dimensions (Inc all Fittings) (H x W x D) |
567 x 540 x 280 mm (225/16 x 211/4 x 11") |
| Weight |
38.5 kg (84 lb 12 oz) |
| THX |
THX® Certified Loudspeakers.
THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries.
|
Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.
** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.
*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.
**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.
