| Channels |
2 |
| Output Power @ 2 Ohms |
2 x 750W SE |
| Output Power @ 4 Ohm |
2 x 750W SE, 1 x 1500W BTL |
| Output Power @ 8 Ohm |
2 x 400W SE, 1 x 1500W BTL |
| Output Power @ 70V |
1 x 1200W BTL |
| Output Power @ 100V |
1 x 1500 W BTL |
| Maximum Total Output Power, all channels driven |
1500 W |
| Power Consumption |
350 W |
| Thermal Output |
1200 BTU |
| Polarity (Default) |
Non-inverting |
| Dimensions |
88 x 440 x 329 mm (36/16 x 175/16 x 1215/16”) |
| Output Voltage |
80Vp / 160Vpp (SE unloaded), 160Vp / 320Vpp (BTL unloaded) |
| Signal-to-Noise Ratio |
>108dB (A-weighted, 20Hz – 20kHz, 8 Ohm load) |
| THD+N (typical) |
<0.05% (20 Hz – 20 kHz, 8 Ohm load, 3db below rated power) |
| Frequency Response |
+0/-0.25dB 20Hz – 20kHz (8 Ohm load, 3dB below rated power |
| Protection Circuits |
Short circuit -, DC, Undervoltage -, Temperature – and Overload protection |
| Power Supply |
Switch mode power supply with Power Factor Correction (PFC) and standby converter |
| Operating Voltage/Frequency |
Universal Mains, 100 V – 240 V, 50 Hz – 60 Hz |
| Standby Consumption |
<0.5W |
| Accessories |
Rack mount kit (pre-installed) |
| Power Ratings |
1% THD @ 120Vac and 230Vac |
| Cabinet Finish |
Black Anodised |
| Weight |
5.3 kg (11 lb 10 oz) |
| Sold As |
Single Unit |