| Features
The Platinum In-Wall 3G is a three-way architectural In-Wall loudspeaker that features an MPD III tweeter, 4” RDT III midrange driver and twin 6" RDT III bass drivers. It can be used either horizontally or vertically anywhere within a high-performance home theatre or two-channel stereo system.
Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.
Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.
| Key Features
- 1 x MPD III high-frequency transducer for a larger, clearer, and more lifelike sound
- 1 x 4” RDT III mid-bass driver for incredible levels of clarity and scale
- 2 x 6” RDT III bass drivers for exceptional weight and depth
- Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
- Bespoke speaker terminals and footings
- Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
- Rigid cabinet construction made from 25 mm MDF with steel back
- Extensive internal bracing using thick MDF cross-bracing techniques
| Specification
| System Type |
3-Way |
| Frequency response, Free-Field (-6dB) |
41 Hz – >60 kHz |
| Frequency Response, In-Room (-6dB) |
27 Hz – >60 kHz |
| Sensitivity (2.83 Vrms @ 1m, Free-Field) |
88 dB |
| Nominal Impedance |
4 Ohms |
| Minimum Impedance |
4.1 Ohms @ 1.6 kHz |
| Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor) |
|
| Recommended Amplifier Power (RMS into 4 Ohm, Music Signal) |
150 – 600 W |
| Bass Alignment |
Sealed |
| Port Tuning Frequency |
N/A |
| Crossover Frequency |
LF/MF: 825 Hz
MF/HF: 3 kHz |
| Drive Unit Complement |
2 x 6” RDT III bass driver,
1 x 4” RDT III mid-range driver,
1 x MPD III tweeter |
| External Dimensions (Including Grille and Terminals (H x W x D)) |
1207 x 332 x 105.5 mm (479/16 x 131/16 x 44/16”) |
| Cut-Out Dimensions |
1175 x 300 x 97.5 mm (461/4 x 1113/16 x 313/16“) |
| Weight (each) |
27.7 kg (61 lb) |
