- Power supply: 8...24 Vac or 12...35 Vdc
- Absorption at 24 Vdc: 3,5 VA
Communication
KNX side
- KNX TP (Twisted Pair) communication port electrically isolated from power supply
- 1440-byte volatile support “KNX image” memory buffer
Modbus TCP/IP side
- Ethernet communication port (IEEE 802.3), RJ45 connector, minimum cable category:
- 5E.Communication Modbus master RTU (Remote Terminal Unit)
- Device addressing from 0 to 250
- Coil, Input, Holding Register e Input Register data exchange
- Single and multiple register reading/writing
- 1440-byte volatile support “Modbus image” memory buffer
Configuration
Ethernet communication port (IEEE 802.3), RJ45 connector, minimum cable category: 5E.
Delivery
The delivery includes the device and terminal blocks to connect to the KNX bus.
Other information
Modbus® is an open source, standard communication protocol suitable for master/slave data exchange between smart devices in various applications, such as industrial production, infrastructure, transportation and energy management.
